Manufacturer
 | Etex Building Performance GmbH A-4021 Linz Austria |
| Product groups: | Calcium silicate insulation board | ||
| Materials used: | Calcium Silikat Cellulosefasern Bindemittel mineralisch | ||
| Renewable raw materials: | 5 | w% | |
| Mineral raw materials: | 95 | w% | |
| Fossil raw materials: | 0 | w% | |
| Recycling materials: | 0 | w% | |
| Bitumen: | 0 | w% | |
| Reference value: | Mineral thermal insulating panel with cellulose fibres (375 kg/m³) | ||
 |
The criteria is relevant and the product supports the fulfillment of the criterion. |
 |
The criteria is relevant and the product does not support the fulfillment of the criterion or there are no validation documents available. |
| The criteria is not relevant for the application. | |
| if an application is displayed in green, all relevant criteria of this application are met. | |
| If at least one of the relevant criteria for an application is not met, the application is displayed in red. |
| thickness: | 2,5 cm 3,0 cm 4,0 cm 5,0 cm 6,0 cm 7,0 cm 8,0 cm 9,0 cm 10,0 cm | ||
| Dimensions (description): | Platten 1000x500 mm Laibungsplatten 500x250x20 mm oder 500x250x10 mm | ||
| ρ density: | 280 | kg/m³ | |
| c specific heat capacity: | 1000 | J/(kg·K) | Richtwert |
| Installation (description): | not specified | ||
| Optional product: | Promatect MC Klebe-Spachtel 25 kg Sack Promatect MC Anpasskeil 50-1 mm 1000x500 mm Promatect MC Grundierung 10 lt. Promatect MC Leibungsplatten 500x250 mm 10 oder 20 mm stark Promatect MC plus Salzsanierungsplatte | ||
| A1-A3 Product stage EI disposal indicator |
reference | Unit |
| Core environmental impact indicators | ||
| GWP-fossil Global warming potential - fossil | 1,01 | kg CO2 Äq./kg |
| GWP-biogenic Global warming potential - biogenic | 0,00 | kg CO2 Äq./kg |
| GWP-total Global warming potential - total | 1,01 | kg CO2 Äq./kg |
| ODP Depletion potential of the stratospheric ozone layer | 8,39·10-8 | kg CFC-11 eq./kg |
| AP Acidification potential | 0,00208 | kg SO2 Äq./kg |
| EP Eutrophication potential | 0,000927 | kg PO43- eq./kg |
| POCP Photochemical Ozone Creation Potential | 0,000276 | kg C2H4 eq./kg |
| Indicators describing resource use | ||
| PERE Primary energy renewable - energy resources | 0,615 | MJ/kg |
| PERM Primary energy renewable - material | 0,00 | MJ/kg |
| PERT Primary energy renewable - total | 0,615 | MJ/kg |
| PENRE Primary energy non-renewable - energy resources | 12,7 | MJ/kg |
| PENRM Primary energy non-renewable - material | 0,00 | MJ/kg |
| PENRT Primary energy non-renewable - total | 12,7 | MJ/kg |
| Country of origin of raw materials (text): | not specified | ||
| CE marking: | not specified | ||
 PDF (36,4 KB) valid until October 2015 |
| Safety data sheet: | not available | ||
| Documents: |
Promatect MC Prospekt (2,90 MB)
| ||
 | A. Pümpel GmbH & Co. KG. A-6800 Feldkirch Austria |
 | Tschabrun Hermann GmbH A-6830 Rankweil Austria |
| Listed since: | Jan 8, 2014 | ||
| baubook product index: | 8710 ah | ||
|
