BIOFA Bianco Öl Aqua Rohholzeffekt 8689
link to this page:
https://www.baubook.at/m/PHP/Info.php?SI=2142740659&SW=16&lng=2

Manufacturer
BIOFA Naturprodukte W.Hahn GmbH
D-73087 Bad Boll
Germany
 
Description
Product groups: Initial coatings for wooden floors, Oils & waxes for wooden floors, Primers for non-mineral substrates (internal)
Product photos:
Materials used: Wasser, aliphatische Polyurethandispersion auf Basis Rizinusöl, Reiswachsdispersion, Kieselsäure, mehrwertige Alkohole, Polysiloxane, mikronisiertes Titandioxid, Konservierungsmittel.
Percentage water: 58w%
 
Criteria for certification, tendering and subsidies
List of Criteria 2020
Initial coatings for wooden floors
2. 2. 1. Limits for CMR substances
2. 2. 4. Limits for substances hazardous to the aquatic environment
2. 2. 5. Ban of alkylphenol ethoxylates (APEO)
2. 2. 10. Ban of substances that are dangerous to health
2. 2. 11. Ban of SVHC
2. 2. 12. Ban of acutely toxic substances
2. 2. 16. Ban of volatile aromatic hydrocarbons
2. 3. 3. Limits for heavy metals
2. 4. 4. Limit for organohalogen compounds in coatings
2. 5. 8. VOC and SVOC limits for coatings on flooring
2. 6. 1. Limits for biocides
2. 6. 2. Limit for free formaldehyde
2. 9. 3. Ban of acid-cured coatings
2. 2. 15. Additional criterion: Prohibition of zirconium salt of 2-ethylhexanoic acid
2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
2. 9. 1. Additional criterion: Avoidance of reactive coatings
3. 2. 2. Additional criterion: Products made of natural materials
Oils & waxes for wooden floors
2. 2. 1. Limits for CMR substances
2. 2. 4. Limits for substances hazardous to the aquatic environment
2. 2. 5. Ban of alkylphenol ethoxylates (APEO)
2. 2. 10. Ban of substances that are dangerous to health
2. 2. 11. Ban of SVHC
2. 2. 12. Ban of acutely toxic substances
2. 2. 16. Ban of volatile aromatic hydrocarbons
2. 3. 3. Limits for heavy metals
2. 4. 4. Limit for organohalogen compounds in coatings
2. 5. 8. VOC and SVOC limits for coatings on flooring
2. 6. 1. Limits for biocides
2. 6. 2. Limit for free formaldehyde
2. 2. 15. Additional criterion: Prohibition of zirconium salt of 2-ethylhexanoic acid
2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
3. 2. 2. Additional criterion: Products made of natural materials
Primers for non-mineral substrates (internal)
2. 2. 1. Limits for CMR substances
2. 2. 4. Limits for substances hazardous to the aquatic environment
2. 2. 5. Ban of alkylphenol ethoxylates (APEO)
2. 2. 10. Ban of substances that are dangerous to health
2. 2. 11. Ban of SVHC
2. 2. 12. Ban of acutely toxic substances
2. 2. 16. Ban of volatile aromatic hydrocarbons
2. 3. 3. Limits for heavy metals
2. 4. 4. Limit for organohalogen compounds in coatings
2. 5. 4. VOC and SVOC limits for interior coatings
2. 6. 1. Limits for biocides
2. 6. 2. Limit for free formaldehyde
2. 9. 3. Ban of acid-cured coatings
2. 2. 15. Additional criterion: Prohibition of zirconium salt of 2-ethylhexanoic acid
2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
2. 9. 1. Additional criterion: Avoidance of reactive coatings
3. 2. 2. Additional criterion: Products made of natural materials

The criteria is relevant and the product supports the fulfillment of the criterion.
 
Technical characteristics
Physical parameters
ρ density: not specifiedkg/m³
c specific heat capacity: not specifiedJ/(kg·K)
 
Serviceability
Flammability class: not specified
 
Processing properties
Installation (description): not specified
Walk on time (… hours): 24h
Order type:
  • Rolls
  • Inject
  • Paint
Processing temperature, at least: 16°C
Can be overpainted after: 6hour(s)
Consumption per procedure (l/m²): 0,075l/m²
Consumption per procedure (kg/m²): 0,076kg/m²
Number of procedures required: 2
Fully cured after: 2day(s)
Drying time: ranging from 2 up to 6hour(s)
 
Ecological characteristics
Ingredients
SVHC (Substances of Very High Concern): The final product ready for sale does not contain any substance of very high concern (SVHC) of the candidate list with more than 0.1% by weight per individual substance.
VOC (g/l): 50g/l
VOC explanation:
Actual value
Softener:
Softener-free
Halogen-organic compounds: 0w%
 
Production of raw materials
 
Service area
CE marking
CE marking: not specified
 
GHS hazard statement, warnings, hazard classes
Water pollution class:
1
P phrases: P102, P101, P262, P501
 
GISCODE
GISCODE – Treatment of parquet/wooden flooring:
W1 Water-dilutable surface treatment agents, solvent-free
GISBAU Product code for Concrete after-treatment:
BSW20 Coating materials, water-based
 
Download
Technical data sheet:
issued on Sept 11, 2023
Safety data sheet:
issued on Mar 13, 2023
Documents:
 
baubook declaration
declared since: Apr 11, 2024
baubook product index: 4510 am
 
baubook green procurement
Harmonised “EcoBuildingCriteria” provided by “ÖkoKauf Wien” and “service package sustainable construction in Vorarlberg”