Manufacturer
| Product groups: | Cellulose-fibre insulation materials (loose) | ||
| Area of application (insulating materials): |
Top SC, accessible
Top SC, between supporting structure | ||
| Product photos: | 
| ||
| Ingredients according to natureplus declaration rules: | Waste paper (daily newspapers) Aluminium sulphate | ||
| Designation of origin of the main ingredients: | The majority of waste paper is sourced from Italy. | ||
| Link to product on the manufacturer's homepage: | https://www.thermofloc.com/de/zellulosedaemmung/einblasdaemmung | ||
| thickness: | minimum: 4 cm maximum: 48 cm | ||
| λr thermal conductivity rated valueAUT: | 0,038 | W/(m·K) | |
| λD thermal conductivity nominal value: | 0,038 | W/(m·K) | |
| λacc. to DIN 4108-4: | 0,04 | W/(m·K) | |
| ρ density: | 60 | kg/m³ | |
| ρ (min) density: | 28 | kg/m³ | |
| ρ (max) density: | 60 | kg/m³ | |
| c specific heat capacity: | 2013 | J/(kg·K) | |
| μ Vapour diffusion resistance factor: | 1,4 |
| natureplus product test: |
The natureplus product test is considered the most comprehensive sustainability test for building materials in Europe:
✓ Verification of all information at the manufacturing plant
✓ Laboratory analysis and expert reports by accredited partners ✓ Regular repeat tests | ||
| healthy living: |
Building products with the natureplus label do not harm the environment or human health with pollutants and, in particular, ensure healthy indoor living spaces.
✓ AgBB scheme Germany (laboratory analysis of emissions according to EN 16516)
✓ EU taxonomy ✓ QNG-compliant * *Exception: cellulose products containing boron do not currently comply with QNG. | ||
| climate protection: |
The manufacture of building products is environmentally friendly and energy efficient, thus contributing to climate protection and CO2 avoidance, and fulfilling social responsibility. The products must be fit for use and recyclable.
✓ CO2 footprint (CFP according to EN 14067) is below the average for comparable products.
✓ Primary energy requirement is below average for comparable products. ✓ Above-average use of renewable energies in production. | ||
| ressource conservation: |
Only construction products made from at least 85% renewable or abundant mineral raw materials or secondary raw materials are eligible. The raw materials must come from sustainable sources.
✓ Social requirements are checked at the production sites.
✓ Investigation of upstream suppliers in the supply chain. ✓ Reuse and recycling through material quality and dismantling instructions. | ||
| recognition and documentation: |
Recognition: Further information on label recognition in building certification systems and subsidy programs:
https://www.natureplus-label.org/anerkennungen
Documentation: The natureplus Sustainability Passport complements the natureplus eco-label with a standardized, third-party verified document for simplified documentation:
https://www.natureplus-label.org/sustainability-passport | ||
 certificate valid until Jan 31, 2030 Certificate no.: 0107-1301-121-1 Status: zertifiziert Issuance Guidelines: 0107 |
| European Technical Assessment (ETA): | available issued on May 25, 2018 issued by: OIB | ||
| Other environmental product declarations (non-compliant): | EPD-PSG-20260315-IBA1-DE (1,13 MB) valid until May 7, 2031 | ||
| Declaration of Performance: | issued on May 25, 2018 | ||
| declared since: | May 19, 2008 | ||
| Amended: | Oct 6, 2026 | ||
| Current: |  recently updated | ||
| baubook product index: | 5647 aa | ||
| version history: | öffnen | ||
|