isofloc AG CH-9606 Bütschwil Switzerland |
Product groups: | Cellulose-fibre insulation materials (loose) | ||
Area of application (insulating materials): |
Lightweight element
Rainscreen
Composite thermal insulation system
Lightweight element
Double-wall construction
Soundproofing
Under board panelling
Under plaster
On supporting structure (from outside)
under supporting structure (inside)
Between supporting structure
Cold roof
Inverted roof
Warm roof
Above the base plate
Above the cellar ceiling
Underneath the cellar ceiling
Ceiling over outside air, plastered
Top SC, accessible
Top SC, between supporting structure
abgehängte Decke
| ||
Description of the area of application: | In contrast to panel-type insulating materials, injected insulation materials are delivered in a loose form. Using blowing machines, the material is loosened and injected into hollow spaces, where it compacts. Injected insulation materials have unbeatable advantages over panel-type insulation materials that enable fast and economical working on the building site or in the works. - Material transport under pressure through blowing hoses - No carrying of the insulating material to the place of use - Fast, economical working - Complete and joint-free insulation into the farthest corners - Structures only need to be opened in a few places - an unbeatable economic advantage, depending on the structure - All insulation thicknesses and forms are possible with a single material (no installation of multiple layers in the case of large insulation thicknesses) - No offcuts/waste | ||
Product description: | Whether it concerns the internal or external insulation of walls or the thermal insulation of floors, ceilings or roofs: isofloc LM proves to be the perfect solution for virtually all insulating tasks. Wherever isofloc cellulose insulation is ultimately used, our strict quality controls guarantee optimal results. isofloc LM bears the FSC®, natureplus and Swiss-Label certifications. isofloc LM is made of newspapers and therefore consists of cellulose, the natural fibre of wood. Therefore, the insulating material also has positive characteristics similar to those of wood: As it hardly conducts heat, the valuable heating energy remains inside in winter. At the same time it stores heat, which ensures cool and steady indoor temperatures in summer. Furthermore, cellulose handles moisture well and is able to save and emit it again. Owners of a house with isofloc insulation therefore live in a breathable “feel-good“ house, as it has a natural moisture balance in its room climate thanks to isofloc LM. Hardly any other insulation material offers this performance! And as far as fire protection is concerned, isofloc LM behaves in a similar way to solid wood. The charcoal layer formation fulfils a protective function for the wood and offers resistance against premature burn-through. Therefore, fire resistance classes from 30 to 90 minutes are possible in many constructions. The flaky cellulose fibres are pressure-blown into partitions and adapt exactly to any shape – so insulation is provided right into the trickiest corners without any gaps at all. Thanks to the joint-free injected thermal insulation, draughts are ruled out. And finally, anyone looking for peace and quiet will find the optimal solution for his home with isofloc. Sound insulation at a high level – that makes your living comfort perfect. And the best thing is: You get all these benefits and are still being gentle to the environment. No other industrially manufactured insulation is as ecological as our cellulose insulating material. | ||
Product photos: | |||
Renewable raw materials: | 92 | w% | |
Ingredients according to natureplus declaration rules: | Recycled paper Mineral salts as flame retardant Boric acid | ||
Country of origin of raw materials (text): | not specified | ||
Recycling materials: | 92 | w% | |
Link to product on the manufacturer's homepage: | http://isofloc.ch/de/unsere-daemmprodukte-2/isofloc-lm/ |
thickness: | minimum: 3 cm maximum: any |
λr thermal conductivity rated valueAUT: | 0,039 | W/(m·K) | |
λD thermal conductivity nominal value: | 0,038 | W/(m·K) | |
ρ density: | 50 | kg/m³ | |
ρ (min) density: | 30 | kg/m³ | |
ρ (max) density: | 60 | kg/m³ | |
c specific heat capacity: | 2150 | J/(kg·K) | |
μ Vapour diffusion resistance factor: | 1,5 |
Flammability class: | B | ||
Smoke emission: | s2 = Limited smoke emission | ||
Flaming droplets: | d0 = No falling / dripping |
Production phase (A1 - A3 according to EN 15804): | Energy efficient production process Environmental protection and clean production Climate Protection via reduced CO2 emissions The compliance with the natureplus guideline values certifies an energy efficient, environmental and climate friendly production process above average. |
A1-A3 Product stage EI disposal indicator |
reference | Unit |
Core environmental impact indicators | ||
GWP-fossil Global warming potential - fossil | 0,546 | kg CO2 Äq./kg |
GWP-biogenic Global warming potential - biogenic | -1,00 | kg CO2 Äq./kg |
GWP-total Global warming potential - total | -0,457 | kg CO2 Äq./kg |
ODP Depletion potential of the stratospheric ozone layer | 4,33·10-8 | kg CFC-11 eq./kg |
AP Acidification potential | 0,00335 | kg SO2 Äq./kg |
EP Eutrophication potential | 0,00135 | kg PO43- eq./kg |
POCP Photochemical Ozone Creation Potential | 0,000279 | kg C2H4 eq./kg |
Indicators describing resource use | ||
PERE Primary energy renewable - energy resources | 1,07 | MJ/kg |
PERM Primary energy renewable - material | 10,4 | MJ/kg |
PERT Primary energy renewable - total | 11,5 | MJ/kg |
PENRE Primary energy non-renewable - energy resources | 6,87 | MJ/kg |
PENRM Primary energy non-renewable - material | 0,00 | MJ/kg |
PENRT Primary energy non-renewable - total | 6,87 | MJ/kg |
Environmental Product Declaration (EPD) - Gabi A1: | EPD_ECIA_cellulose.pdf (1,77 MB) valid until Jan 31, 2023 |
certificate valid until Jan 31, 2024 Certificate no.: 0107-2101-176-1 Status: zertifiziert bis zum Abschluss der laufenden Prüfung Issuance Guidelines: 0107 |
Technical data sheet: | TDB_isoflocLM_BUE_BER_de.pdf (295 KB) issued on Feb 5, 2018 | ||
Safety data sheet: | not available | ||
CE Declaration of Performance: | issued on Aug 29, 2013 | ||
European Technical Approval (ETA): | 2018_ETA_de.pdf (414 KB) valid until June 5, 2018 issued by: Deutsches Institut für Bautechnik |
Listed since: | Jan 27, 2011 | ||
Amended: | July 19, 2018 | ||
baubook product index: | 8792 aa |
|