Manufacturer
| Product groups: | Wood wool insulation boards (without pore sealing), Wood wool panels | ||
| Product photos: | 
| ||
| Link to product on the manufacturer's homepage: | https://www.knaufceilingsolutions.com/de/produkte/heradesign-superfine | ||
| Format l x w: | 1.200 mm x 600 mm 600 mm x 600 mm 1.250 mm x 625 mm 625 mm x 625 mm | ||
| thickness: | 1,5 cm 2,5 cm 3,5 cm | ||
| λr thermal conductivity rated valueAUT: | 0,094 | W/(m·K) | |
| λD thermal conductivity nominal value: | 0,09 | W/(m·K) | |
| ρ density: | 504 | kg/m³ | |
| c specific heat capacity: | not specified | J/(kg·K) |
| Flammability class: | B | ||
| Smoke emission: | s1 = No/minimal smoke emission | ||
| Flaming droplets: | d0 = No falling / dripping | ||
| A1-A3 Product stage indicator |
Wert | Unit |
| Core environmental impact indicators | ||
| GWP-fossil Global warming potential - fossil | 0,641 | kg CO2 Äq./kg |
| GWP-biogenic Global warming potential - biogenic | -0,407 | kg CO2 Äq./kg |
| GWP-luluc Global warming potential - land use and land use change | 0,0115 | kg CO2 eq./kg |
| GWP-total Global warming potential - total | 0,246 | kg CO2 eq./kg |
| ODP Depletion potential of the stratospheric ozone layer | 4,07·10-8 | kg CFC-11 eq./kg |
| AP Acidifcation potential - Accumulated Exceedance | 0,00185 | mol H+ eq./kg |
| EP-freshwater Eutrophication potential - freshwater | 0,000160 | kg P eq./kg |
| EP-marine Eutrophication potential - marine | 0,000471 | kg N eq./kg |
| EP-terrestrial Eutrophication potential - terrestrial | 0,00434 | mol N eq./kg |
| POCP Photochemical Ozone Creation Potential | 0,00131 | kg NMVOC eq./kg |
| ADPE Abiotic depletion potential for non fossil resources | 1,44·10-6 | kg Sb eq./kg |
| ADPF Abiotic depletion potential for fossil resources | 5,62 | MJ/kg |
| WDP Water (user) deprivation potential | 0,202 | m³ world eq. deprived/kg |
| Indicators describing resource use | ||
| PERE Primary energy renewable - energy resources | 0,974 | MJ/kg |
| PERM Primary energy renewable - material | 5,52 | MJ/kg |
| PERT Primary energy renewable - total | 6,50 | MJ/kg |
| PENRE Primary energy non-renewable - energy resources | 5,63 | MJ/kg |
| PENRM Primary energy non-renewable - material | 0,00 | MJ/kg |
| PENRT Primary energy non-renewable - total | 5,63 | MJ/kg |
| SM Use of secondary material | 0,152 | kg/kg |
| RSF Use of renewable secondary fuels | 0,00 | MJ/kg |
| NRSF Use of non renewable secondary fuels | 0,00 | MJ/kg |
| FW Use of net fresh water | 0,00469 | m³/kg |
| Environmental information describing waste categories | ||
| HWD Hazardous waste disposed | 7,03·10-6 | kg/kg |
| NHWD Non hazardous waste dispose | 0,0435 | kg/kg |
| RWD Radioactive waste disposed | 1,72·10-5 | kg/kg |
| Environmental information describing output flows | ||
| CRU Components for re-use | 0,00 | kg/kg |
| MFR Materials for recycling | 0,00 | kg/kg |
| MER Materials for energy recovery | 0,00 | kg/kg |
| EEE Exported electrical energy | 0,00 | MJ/kg |
| EET Exported thermal energy | 0,00 | MJ/kg |
| Environmental Product Declaration (EPD) - ecoinvent A2 (Austrian-compliant): | valid until July 7, 2026 | ||
| natureplus product test: |
The natureplus product test is considered the most comprehensive sustainability test for building materials in Europe:
✓ Verification of all information at the manufacturing plant
✓ Laboratory analysis and expert reports by accredited partners ✓ Regular repeat tests | ||
| healthy living: |
Building products with the natureplus label do not harm the environment or human health with pollutants and, in particular, ensure healthy indoor living spaces.
✓ AgBB scheme Germany (laboratory analysis of emissions according to EN 16516)
✓ EU taxonomy ✓ QNG-compliant * *Exception: cellulose products containing boron do not currently comply with QNG. | ||
| climate protection: |
The manufacture of building products is environmentally friendly and energy efficient, thus contributing to climate protection and CO2 avoidance, and fulfilling social responsibility. The products must be fit for use and recyclable.
✓ CO2 footprint (CFP according to EN 14067) is below the average for comparable products.
✓ Primary energy requirement is below average for comparable products. ✓ Above-average use of renewable energies in production. | ||
| ressource conservation: |
Only construction products made from at least 85% renewable or abundant mineral raw materials or secondary raw materials are eligible. The raw materials must come from sustainable sources.
✓ Social requirements are checked at the production sites.
✓ Investigation of upstream suppliers in the supply chain. ✓ Reuse and recycling through material quality and dismantling instructions. | ||
| recognition and documentation: |
Recognition: Further information on label recognition in building certification systems and subsidy programs:
https://www.natureplus-label.org/anerkennungen
Documentation: The natureplus Sustainability Passport complements the natureplus eco-label with a standardized, third-party verified document for simplified documentation:
https://www.natureplus-label.org/sustainability-passport | ||
 certificate valid until Dec 31, 2026 Certificate no.: 1007-187-0101 Status: zertifiziert Issuance Guidelines: 1007 |
 PDF (226 KB) issued on Oct 26, 2021 | PEFC (Certified products available): available PDF (82,2 KB) valid until August 2026 |
| CE Certificate of conformity: | 0977_CPR_B18044_13168_2023_dt.pdf (107 KB) issued by: TU München, Holzforschung München | ||
| Declaration of Performance: | issued on Apr 8, 2022 | ||
| declared since: | Feb 16, 2022 | ||
| Amended: | May 31, 2023 | ||
| baubook product index: | 9527 af | ||
| version history: | öffnen | ||
|
